LIYOU BulkTech · Engineering tools
Tubular Chain Conveyor Calculator
Calculate capacity. Find your conveyor.
Estimate conveying capacity and compare GL-series models for your material and process.
Preliminary engineering sizing01 / Preliminary engineering sizing
Define your material & duty
Enter your requirements. We will compare the smallest standard model that meets the planning capacity.
03 / Preliminary engineering sizing
Your preliminary sizing
One density. One set of conditions. A transparent comparison.
All calculations are preliminary estimates based on a fixed chain speed of 0.3 m/s and a fill factor of 0.5. Actual conveying performance depends on material properties, conveyor configuration, conveying distance, vertical lift, bends, and operating conditions. Final equipment selection must be reviewed by LIYOU BulkTech engineering team.
LIYOU BulkTech / Pending engineering confirmation
Need a confirmed conveyor solution?
Our engineering team can review your conveying requirements and recommend a suitable configuration.
How to calculate tubular chain conveyor capacity
Convert the tube outside diameter and wall thickness from millimetres to inner diameter in metres. Calculate the occupied cross-sectional volume at the fixed speed and fill factor, then multiply by bulk density for mass flow. Values use full precision and are displayed to two decimal places.
D = (OD − 2 × t) / 1000Qv = 3600 × (π / 4) × D² × 0.3 × 0.5Qm = Qv × ρHow to select the right conveyor size
Divide required mass flow by bulk density for target volume flow. Apply a provisional 20% planning allowance, then select the smallest GL model whose theoretical mass capacity meets that allowance. Distances, lift and bends are recorded for review; no validated route-resistance correction is applied.
Factors affecting conveyor performance
This geometric model does not separately account for chain and disc displacement, slip, bend resistance or lifting load. Material moisture, cohesion, abrasion, temperature, cleanability and the complete loaded and return route require engineering confirmation. This tool does not calculate motor power or chain tension.
GL-series model reference
GL89–GL325 use preliminary wall thicknesses of 4 mm (GL89–GL159) and 8 mm (GL219–GL325). All thicknesses and bore sizes require factory confirmation. Catalogue capacity is managed separately: the catalogue groups GL108/133 at 5–7 m³/h and states 50 m³/h for GL325; these figures must not replace the geometric results.
| Conveyor model | Outer diameter mm | Inner diameter mm |
|---|---|---|
| GL89 | 89 | 81 |
| GL108 | 108 | 100 |
| GL133 | 133 | 125 |
| GL159 | 159 | 151 |
| GL219 | 219 | 203 |
| GL273 | 273 | 257 |
| GL325 | 325 | 309 |
Frequently asked questions
Is the result a guaranteed production rate?
No. It is a preliminary geometric estimate. Our engineers must review the material, actual equipment structure and complete route.
Can I change speed or filling factor?
Version 1 fixes speed at 0.3 m/s and filling factor at 0.5. These are calculation assumptions, not universal operating settings.
What if no standard model meets my requirement?
The centre card requests engineering review. We do not label an undersized model as a suitable recommendation.