
Project record
Rotary Vibrating Screen Installation & Trial Run
Project dated 3 September 2026. Screen assembly and rubber seal fitting are shown in the workshop photos; the trial run was completed without issues.
- Project date
- Equipment
- Rotary Vibrating Screen
- Recorded work
- Assembly, rubber seal fitting & trial run
Assembled rotary screens
The trial run was completed without issues. The workshop photos show the assembled machines with their covers fitted, circular decks stacked and discharge outlets in place. Side views show the outlet positions and frame connections.


Screen frames and outlets
With the cover removed, the circular rim, inner surface and opening to the side outlet are visible. The second view shows the outside of the frame and its discharge connections. These are the details we use when discussing frame fit and outlet orientation.


Fitting the rubber sealing sleeve
A rubber sealing sleeve is being fitted around the screen frame to improve sealing. The reverse-side photograph shows the mesh and supporting frame.


Cover and motor details
The open-cover photo records its inside surface and rim before fitting. The motor close-up shows the terminal housing, cable entry and the instruction label beside it. Both are part of this project’s workshop photo record.


Equipment details
See the rotary vibrating screen configurations and specifications. For a replacement frame or mesh, send the machine model, frame dimensions, required opening and a photograph of the fitting.
Equipment information
Rotary Vibrating Screen ↗Start with your material
Let's build the right solution.
Share your material, throughput and process requirements. We will review the details needed for equipment selection.